Basic Tracker Specification » Basic Tracker Specification
Basic Tracker Technical Specifications
Overview
|
Box size: | 67.2mm long 5.5mm wide 56mm height Gps antenna's extends from box 7.42mm |
Material black abs plastic vacuum formed | |
Mode select switch: | This is used to select static or live track operation |
Power switch: | Main power switch isolates all power |
Fuse requirements: | To provide maximum safety the tiso unit should have a 3 amp fuse in the plus rail red wire, 3 amp in the o volt rail black wire and 1 amp in the ignition input yellow wire |
Electrical power requirements: | 12volts to 40 volts dc |
Battery voltage: | 3.7 volts |
Battery type: | lithium ion |
Duty cycle: | Assuming that the internal battery is fully charged before the external power supply is removed the following duty cycle is expected : 24 hrs idling in live track mode and Bluetooth disabled 12 months idling in static mode |
General Specifications
Internal Memory: | Will store upto two weeks of data |
Material black abs plastic vacuum formed | |
Modem and SIM card: | Uses a quad band modem and works with any network on any tariff type |
GRPS Aerial: |
External passive antenna type, supplied with a 1 meter length of cable |
GPS Aerial: | External passive antenna type, supplied with a 1 meter length of cable |
Ignition input: | Sends ignition on and off events back to the main server |
DAT input: | Digital to analogue input: this is a filtered input for use with passive infrared and motion detectors. Warnings are sent back to the server and optionally to a mobile phone |
Normally closed input: | Used with normally closed switches and anti tamper loops. sends a warning to the server and optionally to a mobile phone if opened |
Warning set zero input: | This disables DAT input and normally closed input for 30 seconds to allow for a timed exit prior to activating monitoring system |
Alarm input: | This connected to vehicles alarm output or can be connected to panic buttons warnings are sent back to the server pc |
Uncommitted IO | There are 3 uncommitted io used to provide additional customer specified functionality |
Relay: | A relay with 1 amp volt free contacts: Is used to enable the use of specialised immobiliser hardware and is activated by sms mobile phone |
Axillary warning output: | This is connected to the immobiliser relay and is triggered to 0 volt rail max current .5 amp used as immobiliser warning |
Speed and mileage: | Speed and mileage data is sent back to the server to allow for vehicle maintenance and speed monitoring |
Related Pages
Vehicle Tracker
Vehicle Tracker Installation
Caravan Tracker